Niagara Cutter 46494 Carbide Ball Nose End Mill, Metric, AlTiN Finish, Roughing and Finishing Cut, 30 Degree Helix, 4 Flutes, 101mm Overall Length, 25mm Cutting Diameter, 25.000mm Shank Diameter

You looking to find the "Niagara Cutter 46494 Carbide Ball Nose End Mill, Metric, AlTiN Finish, Roughing and Finishing Cut, 30 Degree Helix, 4 Flutes, 101mm Overall Length, 25mm Cutting Diameter, 25.000mm Shank Diameter" Good news! You can purchase Niagara Cutter 46494 Carbide Ball Nose End Mill, Metric, AlTiN Finish, Roughing and Finishing Cut, 30 Degree Helix, 4 Flutes, 101mm Overall Length, 25mm Cutting Diameter, 25.000mm Shank Diameter with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $157.43    

Product Feature

• Four flutes produce a better finish than fewer flutes
• Aluminum titanium nitride (AlTiN) coating lubricates the end mill for high-temperature stability and abrasion resistance, offering better heat resistance than TiN, TiAlN, and TiCN coatings
• Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures
• Ball nose end mills (also called ball end) create contoured surfaces
• Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling

Product Description

The Niagara Cutter CB430M AlTiN-coated carbide metric ball nose end mill has four flutes and a 30-degree helix angle for general-purpose machining on a range of materials. Four flutes produce a better finish than fewer flutes. The tool’s ball nose creates contoured surfaces where sharp corners are not required, and the center-cutting design has cutting teeth at the end of the tool, so it can be fed into the workpiece like a drill bit. The 30-degree helix angle supports general-purpose applications. It balances lower angles �� strong cutting edge for difficult-to-machine materials with higher angles increased cutting action.

The AlTiN coating resists heat better than TiN, TiAlN, and TiCN coatings, increasing tool life and performance. It also offers increased hardness compared to TiN and may reduce the need for lubricants based on the application. (AlTiN is suitable for a range of materials, but TiCN or uncoated end mills are recommended for machining aluminum.) The carbide substrate is harder than high-speed or cobalt steel, making it more wear resistant at high speeds and providing longer tool life. Cutting diameter tolerance is +0 mm to -.050 mm. The round shank accommodates a variety of holders.

End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool � s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts.

Niagara Cutter has been designing and manufacturing precision cutting tools since 1954. Specializing in end mills, cutting mills, and saws, the company is based in New York and manufactures its tools at facilities in Pennsylvania and Massachusetts. This allows the company control over production, from substrate to coating, which is essential for customers in a variety of industries, especially aerospace and automotive.

</p>

Niagara Cutter 46494 Carbide Ball Nose End Mill, Metric, AlTiN Finish, Roughing and Finishing Cut, 30 Degree Helix, 4 Flutes, 101mm Overall Length, 25mm Cutting Diameter, 25.000mm Shank Diameter Review

We sell desktop CNC and manual mills and lathes and build custom CNC machines, all made in the USA and Germany and do a lot of machining, especially CNC milling. Niagara endmills are of very high quality and I highly recommend them.
M. Menig
MDA Precision, Gilroy, CA

Most of the consumer Reviews tell that the "Niagara Cutter 46494 Carbide Ball Nose End Mill, Metric, AlTiN Finish, Roughing and Finishing Cut, 30 Degree Helix, 4 Flutes, 101mm Overall Length, 25mm Cutting Diameter, 25.000mm Shank Diameter" are high quality item. You can read each testimony from consumers to find out cons and pros from Niagara Cutter 46494 Carbide Ball Nose End Mill, Metric, AlTiN Finish, Roughing and Finishing Cut, 30 Degree Helix, 4 Flutes, 101mm Overall Length, 25mm Cutting Diameter, 25.000mm Shank Diameter ...