Niagara Cutter 25326 High Speed Steel (HSS) Square Nose End Mill, Long Length, Long Reach, Inch, Weldon Shank, Uncoated (Bright) Finish, Roughing and Finishing Cut, 30 Degree Helix, 2 Flutes, 7.25" Overall Length, 1.000" Cutting Diameter, 1.000" Shank Diameter

You looking to find the "Niagara Cutter 25326 High Speed Steel (HSS) Square Nose End Mill, Long Length, Long Reach, Inch, Weldon Shank, Uncoated (Bright) Finish, Roughing and Finishing Cut, 30 Degree Helix, 2 Flutes, 7.25" Overall Length, 1.000" Cutting Diameter, 1.000" Shank Diameter" Good news! You can purchase Niagara Cutter 25326 High Speed Steel (HSS) Square Nose End Mill, Long Length, Long Reach, Inch, Weldon Shank, Uncoated (Bright) Finish, Roughing and Finishing Cut, 30 Degree Helix, 2 Flutes, 7.25" Overall Length, 1.000" Cutting Diameter, 1.000" Shank Diameter with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $75.02    

Product Feature

• Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool's ability to remove material
• Extended-reach neck style provides access to recessed areas of the workpiece
• High-speed steel is compatible with a variety of materials
• Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
• Square nose end mills (also called square end) create sharp, unrounded cuts

Product Description

The Niagara Cutter SEL250 uncoated high-speed steel square end mill has two flutes, a 30-degree helix angle, and an extended-reach neck design for general-purpose machining on a range of materials. The extended-reach neck style provides greater access to recessed areas of the workpiece than tools with a standard neck style. The two flutes have better chip-carrying capacity than end mills with more flutes while offering additional support when the tool goes deep into the material in applications with a high depth of cut. High-speed steel (HSS) is a common general-purpose steel for cutting tools and is compatible with a variety of materials. With no coating or surface treatment, this uncoated tool can be used on a broad range of materials.

The 30-degree helix angle supports general-purpose applications. It balances lower angles � strong cutting edge for difficult-to-machine materials with higher angles �� increased cutting action. The tool’s square end creates sharp, unrounded cuts, and the center-cutting design has cutting teeth at the end of the tool, so it can be fed into the workpiece like a drill bit. The tool can be used for profiling, slotting, and pocketing. Cutter diameter tolerance is +0.001 to -0.000 � . The tool has a Weldon shank.

End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool� s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts.

Niagara Cutter has been designing and manufacturing precision cutting tools since 1954. Specializing in end mills, cutting mills, and saws, the company is based in New York and manufactures its tools at facilities in Pennsylvania and Massachusetts. This allows the company control over production, from substrate to coating, which is essential for customers in a variety of industries, especially aerospace and automotive.

</p>

Niagara Cutter 25326 High Speed Steel (HSS) Square Nose End Mill, Long Length, Long Reach, Inch, Weldon Shank, Uncoated (Bright) Finish, Roughing and Finishing Cut, 30 Degree Helix, 2 Flutes, 7.25" Overall Length, 1.000" Cutting Diameter, 1.000" Shank Diameter Review

Surface quality is great, cutting edges are all even and consistant. Expected the recessed shoulder to be a bit longer, but worked for my purposes. Cutting surface is 3/8" tall, neck is strait for another 1/4" then tapers to 3'8 shank.

Most of the consumer Reviews tell that the "Niagara Cutter 25326 High Speed Steel (HSS) Square Nose End Mill, Long Length, Long Reach, Inch, Weldon Shank, Uncoated (Bright) Finish, Roughing and Finishing Cut, 30 Degree Helix, 2 Flutes, 7.25" Overall Length, 1.000" Cutting Diameter, 1.000" Shank Diameter" are high quality item. You can read each testimony from consumers to find out cons and pros from Niagara Cutter 25326 High Speed Steel (HSS) Square Nose End Mill, Long Length, Long Reach, Inch, Weldon Shank, Uncoated (Bright) Finish, Roughing and Finishing Cut, 30 Degree Helix, 2 Flutes, 7.25" Overall Length, 1.000" Cutting Diameter, 1.000" Shank Diameter ...