PC Products PC-7 Two-Part Heavy Duty Multipurpose Epoxy Adhesive Paste, 10 gal in Two Pails, Charcoal Gray

You looking to find the "PC Products PC-7 Two-Part Heavy Duty Multipurpose Epoxy Adhesive Paste, 10 gal in Two Pails, Charcoal Gray" Good news! You can purchase PC Products PC-7 Two-Part Heavy Duty Multipurpose Epoxy Adhesive Paste, 10 gal in Two Pails, Charcoal Gray with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $608.37    

Product Feature

• Two-part multipurpose epoxy adhesive paste works as a bonding agent, sealant, and filler for a range of indoor and outdoor applications
• Bonds many materials, including fiberglass, wood, concrete, many metals, brick, glass, ceramic, and rubber
• Seals oil, gas, and water tank leaks, as well as plumbing and masonry cracks
• Fills holes, castings, and molds
• Application temperature range is 35 to 115 degrees F, and service temperature range is -20 to +200 degrees F

Product Description

The PC Products PC-7 is a two-part multipurpose heavy duty epoxy adhesive paste used as a bonding agent, sealant, and filler in indoor and outdoor applications. The epoxy is made from a non-sagging, high-tack paste that can be used in vertical and overhead applications. It can bond a range of materials; seal oil, gas, and water tank leaks, as well as plumbing and masonry cracks; and fill holes, castings, and molds. After maximum curing, the product has high strength and provides resistance to mild acids, caustics, detergents, gasoline, fuel oil, and fresh and salt water. It can be painted, stained, and machined, and is nontoxic and nonconductive after it has been cured.

Specifications

Compatible materials	Fiberglass, wood, concrete, many metals, brick, glass, ceramic, and rubber
Application temperature range	35 to 115 degrees F
Service temperature range	-20 to +200 degrees F
Working time	60 minutes maximum (at 70 degrees F)
Cure time for service	Overnight (dependent on temperature, humidity, and application size)
Maximum cure time	1 to 2 weeks (dependent on temperature, humidity, and application size)
Mix ratio	1:1

Protective Coating Company manufactures products to repair and restore various materials, including wood and concrete. The company, founded in 1954, is headquartered in Allentown, PA.

What's in the Box?

• 10 gal. PC-7 in two pails (5-gal. pail of Part A and 5-gal. pail of Part B)

PC Products PC-7 Two-Part Heavy Duty Multipurpose Epoxy Adhesive Paste, 10 gal in Two Pails, Charcoal Gray Review

Prepare ahead to mix and you'll need gloves and sticks you may want to throw away. Solves while damp with household vinegar. Once it is set it is pretty tough to get off and got some in a tiny crack in my rough hands and it had to be removed like a splinter once it dried.

Easiest to simply take both whole cans and put both together on a discardable hard surface (6" x 12" piece of dustless plywood scrap)to mix well. I used plastic painters knives to quickly mix and apply and that worked very well. Cheap enough to use the whole can and make ENOUGH to use all at once. Like I said prepare ahead.

Essentially a gooey epoxy that hardens into a VERY tough bond. If it touches a surface (skin etc) then it will stay on it SO remove with household vinegar while damp. The data sheet shows thousands of pounds of tensile strength per sq inch when cured and supported.

Not for use around fire etc but in a wooden boat it is excellent to fill and then mill an area. I would tend to use this to fill an area that is well supported rather than put it out on the end of an arm etc as a primary strength point. If you put a greased bolt into the stuff the bolt will back out and leave threads if that does not work heating the bolt with a soldering iron briefly will let it back out also. This can take a thread well if supported well and cured. More for tertiary strength than primary strength (in my opinion) on critical equipment.

A very thin coat comes off (pops off) a smooth surface so unless it is affixed to the substrate properly by roughening the substrate a surform will take off a cured thin coat easily. Works best to create a tough bond in an area rather than cosmetic patches. Appears to be pure epoxy without fiberglass fibers unlike Bondo. I will use it when I repair my mast step as opposed to other epoxies.

Sands and surforms (micro plane) and scrapes very well once set completely on a roughened surface.

Get all amine blush and waxes and oils off the substrate before affixing the PC....

Most of the consumer Reviews tell that the "PC Products PC-7 Two-Part Heavy Duty Multipurpose Epoxy Adhesive Paste, 10 gal in Two Pails, Charcoal Gray" are high quality item. You can read each testimony from consumers to find out cons and pros from PC Products PC-7 Two-Part Heavy Duty Multipurpose Epoxy Adhesive Paste, 10 gal in Two Pails, Charcoal Gray ...